Water Pump O-Ring - ACDelco (251-2053)
ACDelco - 2512053
Sale Price$16.47
Description : GM Genuine Parts Engine Water Pump O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These o-rings are used in some applications instead of paper or composite gaskets to seal the water pump housing. The interface between components will have a machined groove to accept the O-ring. The O-ring is slightly compressed when assembled to provide a liquid-tight seal, keeping engine coolant in and air and dirt out. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Min. 12 Months
- Safe, Secure Checkout
Product Details
Description
GM Genuine Parts Engine Water Pump O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These o-rings are used in some applications instead of paper or composite gaskets to seal the water pump housing. The interface between components will have a machined groove to accept the O-ring. The O-ring is slightly compressed when assembled to provide a liquid-tight seal, keeping engine coolant in and air and dirt out. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Part Number (MPN)
251-2053
Brand
SKU
251-2053
UPC / GTIN
707773849545 / 00707773849545
Condition
New
Other Names
24439799
Brand
GM Genuine Parts
FAQ - Answer 1
Yes. Always consult the Vehicle Owner's manual or an expert technician before making any repairs or adjustments
FAQ - Answer 2
Yes. ACDelco GM Original Equipment parts are equivalent to your GM vehicle's original factory components.
FAQ - Answer 3
No. Water pumps can vary greatly in size and appearance depending on the vehicle they are designed for.
FAQ - Answer 4
Yes. The water pump is responsible for moving coolant through your vehicle's cooling system, keeping the heat generated by your engine at acceptable levels, and helping prevent overheating. A malfunctioning water pump can cause your engine to overheat, which may result in severe and costly engine damage.
FAQ - Answer 5
Yes. As part of regular cooling system operation, the water pump sends hot coolant to the heater core of your engine, which transfers heat into the passenger cabin of your vehicle. If this hot coolant is unable to reach the heater core, then this heat transfer cannot occur, and your passenger compartment remains colder than you want.
FAQ - Answer 6
No. Your vehicle's water pump keeps coolant moving as long as the engine is running and stops when the engine is turned off. If you want to be able to circulate coolant for a short time after the engine has been turned off, an auxiliary electric water pump is needed.
FAQ - Question 1
Should the Vehicle Owner's manual or an expert technician be consulted before making any repairs or adjustments?
FAQ - Question 2
Will ACDelco GM Original Equipment Water Pumps, Kits and other components match the quality of my GM vehicle's original factory parts?
FAQ - Question 3
Do all water pumps look the same?
FAQ - Question 4
Can a malfunctioning water pump harm my engine?
FAQ - Question 5
Does the water pump affect the temperature inside the passenger compartment of my vehicle?
FAQ - Question 6
Does the water pump work when my vehicle is turned off?
Features & Benefits - Bullet 1
Made from some heat and chemical-resistant materials
Features & Benefits - Bullet 2
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features & Benefits - Bullet 3
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Features & Benefits - Bullet 4
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 5
GM regularly updates production and service part designs to integrate new materials and technologies
Good Maintenance Practices - Section 1 - Header
Before purchasing and installing an engine water pump housing gasket, make sure it is the correct fit for your vehicle.
Good Maintenance Practices - Section 2 - Bullet 1
Clean all excess dirt and debris from the water pump housing.
Good Maintenance Practices - Section 2 - Bullet 2
Run your vehicle to increase engine temperature, and ensure the system is pressurized.
Good Maintenance Practices - Section 2 - Bullet 3
Inspect for leakage at the water pump outlet housing or the rear cover gasket, and leakage at the water pump vent or weep hole.
Good Maintenance Practices - Section 2 - Bullet 4
A stain around the weep hole is acceptable. However, if a weep occurs with the engine running and the coolant system pressurized, then the water pump should be replaced.
Good Maintenance Practices - Section 2 - Header
Tips for Water Pump Inspection:
Good Maintenance Practices - Section 3 - Bullet 1
Clean and reinstall the coolant recovery reservoir before flushing the cooling system.
Good Maintenance Practices - Section 3 - Bullet 10
Inspect related components in the cooling system, including your fan blades, fan clutch, engine mounts, radiator, belts and hoses, and reservoir.
Good Maintenance Practices - Section 3 - Bullet 2
Flush the cooling system completely, using power flush equipment or thermal cycling the system with clean water three times. The most effective method of system flushing is to use a coolant exchanger, following the manufacturer's operating instructions.
Good Maintenance Practices - Section 3 - Bullet 3
Do not use any non-approved flush agents and replace the coolant according to manufacturer's specifications.
Good Maintenance Practices - Section 3 - Bullet 4
Clean all sealing surfaces, and make sure all old gasket material is removed before installing your replacement component.
Good Maintenance Practices - Section 3 - Bullet 5
Never strike the water pump shaft, since this will damage the new water pump.
Good Maintenance Practices - Section 3 - Bullet 6
Torque all bolts according to the manufacturer's specifications and adjust belts to proper tension (if applicable) to manufacturer's specifications.
Good Maintenance Practices - Section 3 - Bullet 7
Use sealant tabs only if recommended. Some sealant tabs or similar compounds may restrict coolant flow through the passages of some cooling systems.
Good Maintenance Practices - Section 3 - Bullet 8
With the new pump installed, turn the hub by hand and check for rotation.
Good Maintenance Practices - Section 3 - Bullet 9
After installation, pressure-test the system for leaks and check for sufficient fan blade clearance between the blade and radiator shroud.
Good Maintenance Practices - Section 3 - Header
Tips for Water Pump Servicing & Installation:
Height (in)
0.3
Length (in)
5.9
Material
Rubber
Maximum Diameter
4.09<br />103.8
Minimum Diameter
3.9<br />98.99
Programming Required
No
Rim Shape
Round
Signs of Wear & Troubleshooting - Section 1 - Bullet 1
Leaking Coolant - Puddles of coolant under your vehicle, a constant drip or stream of coolant from the water pump's weep hole, or a constantly empty or low coolant reservoir are all signs of potential water pump wear, and may be caused by cracks in the pump, or seal or gasket failures.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2
Engine Overheating - If your vehicle's engine overheats, it may not be receiving the required coolant flow. Make sure that your vehicle's cooling system contains the proper level of coolant.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3
Rumbling Noise in the Pump - A rumbling, squeaking, or screeching noise near the front of your vehicle when you start it may indicate a malfunctioning water pump bearing.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4
Visible Component Wear - Worn seals, corrosion, cavitation/pitting of pump components, or a loose or wobbly pump shaft are all signs of wear that may lead to water pump failure and should be addressed.
Signs of Wear & Troubleshooting - Section 1 - Header
Signs of wear for engine water pump seals include but are not limited to:
Thickness
0.12<br />3
Weight (lb)
0.01
Width (in)
5.9
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|---|---|---|---|
Vehicle #1
Year
Make
Model
Body & Trim
Engine & Transmission
| Brand | Equivalent Part Numbers |
|---|---|
BrandEquivalent Part Numbers
GM
24439799
Shipping Policy
- In stock orders ship within 24 hours.
- Weekend orders will be processed the next business day.
- If a part is not in stock and must be ordered from the manufacturer, it usually takes 2-3 days to arrive to us and will be promptly shipped to you. Most of the orders are shipped complete within 2-3 business days. A few of the parts ordered from the manufacturer may take up to 5-6 business days to arrive and will shipped to you immediately.
- Depending upon location, ground shipments usually take 2-7 days.
- Your order may be shipped Overnight for an additional cost.
- Oversized shipments will be additional; you will be contacted prior to shipping for approval.
- We cannot guarantee transit times for ground and oversize orders.
- Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost to the customer.
- We do not ship internationally.
- In the unlikely event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible.
- We do not ship COD orders.
We use the following shipping parties:
- UPS
- USPS
Some products available are shipped directly from the manufacturer or supplier rather than from our own warehouse. This allows us to offer you a wider selection of parts at competitive prices. When an item shows "Drop Ship" the supplier currently has it in stock and it will typically ship within 1–2 business days
Check out our Shipping Policy for more details.
Return Policy
30-Day Return Policy – Upgrade Auto Parts
At Upgrade Auto Parts, we want you to be completely satisfied with your purchase. If for any reason you are not happy with your order, you can return it within 30 days of receiving your item for a refund or exchange, subject to the following conditions:
Eligibility: Returns are accepted on parts that are unused, in original condition, and in the original packaging. Items that have been installed, used, or modified are not eligible for return.
Shipping Costs: The customer is responsible for return shipping costs unless the return is a result of a Upgrade Auto Parts error (e.g., wrong part sent or defective item). We recommend using a trackable shipping service to ensure your return reaches us safely.
Refunds & Exchanges: Once the return is received and inspected, we will issue a refund to your original payment method or process an exchange if preferred. Refunds typically take 5-7 business days to be processed.
If you have any questions or need assistance with your return, our customer service team is here to help!
Thank you for shopping with Upgrade Auto Parts!
Check out our Return Policy for more details.
ACDelco
Browse our wide selection of parts & accessories available to be shipped directly to you!
Upgrade Auto Parts
Welcome to Upgrade Auto Parts, your trusted source for premium automotive components. We understand that finding the right parts for your vehicle can be a challenge, which is why we've made it our mission to simplify the process. From essential maintenance items to performance upgrades, our extensive catalog is built on a foundation of quality, reliability, and customer satisfaction. We're here to provide the expertise and the products you need to keep your vehicle running at its best. Drive smarter, choose Upgrade Auto Parts.