Drive Belt Tensioner - ACDelco (12647765)
ACDelco - 12647765
- Sale Price: $37.61
Details
- Brand:
- SKU:
12647765
- GTIN: 00808709374541
- UPC: 808709374541
- Other Names:
12647765
- Description: GM Genuine Parts Drive Belt Tensioner Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These assemblies are spring-loaded pulleys designed to draw tension on your vehicle's serpentine belt. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE). ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Buick;Cadillac;Chevrolet;GMC - Condition: New
- Notes: Pallet Layer Maximum: 1
Warranty Special: 24 Months/Unlimited Miles Limited Warranty for Parts (plus Labor if installed by a GM dealer)|"36 Months/60,000 Kilometers Limited Warranty (Parts & Labour)"
Maximum Cases per Pallet Layer: 144
Harmonized Tariff Code (HTS): 8708998180
Life Cycle Status Code: 4
Life Cycle Status Description: Announced
Country of Origin (Primary): CA
Warranty Special UOM: TX
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov - Sale Price: $37.61
Drop Ship
Direct Shipping From Supplier [*]
Some products available are shipped directly from the manufacturer or supplier rather than from our own warehouse. This allows us to offer you a wider selection of parts at competitive prices. When an item shows "Drop Ship" the supplier currently has it in stock and it will typically ship within 1–2 business daysAdditional Information
| Brand | GM Genuine Parts |
| Activation Type | Spring |
| Belt Type | Serpentine |
| Contact Surface | Smooth/Backside |
| Contact Surface Material | Steel |
| FAQ - Answer 1 | Yes. If the drive belt is too tight, damage to other drive components may occur. |
| FAQ - Question 1 | Can a drive belt be too tight? |
| Features & Benefits - Bullet 1 | Helps keep drive belt at correct tension to help maintain proper function |
| Features & Benefits - Bullet 2 | Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE) |
| Features & Benefits - Bullet 3 | GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors. |
| Features & Benefits - Bullet 4 | GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle |
| Features & Benefits - Bullet 5 | GM regularly updates production and service part designs to integrate new materials and technologies |
| Flanged | Yes |
| Good Maintenance Practices - Section 1 - Bullet 1 | Be sure to have the replacement tensioner properly aligned to the other drive component pulleys. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Have your vehicle inspected as soon as possible if the 'Service Engine Soon' light illuminates. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Have your vehicle inspected immediately if the 'Service Engine Soon' light flashes rapidly, as this could indicate an engine misfire condition which may damage your engine and/or engine emission components. |
| Good Maintenance Practices - Section 1 - Bullet 4 | Regularly inspect assembly for signs of damage or wear, and replace them if signs of damage are found. |
| Good Maintenance Practices - Section 1 - Header | Before purchasing and installing a drive belt tensioner assembly, make sure it is the correct size and fit for your vehicle. |
| Height (in) | 3.2 |
| Housing Material | Aluminum |
| Inside Diameter | 60.4 |
| Inside Diameter (mm) | Silver |
| Length | 4.03 |
| Material | Steel |
| Mounting Bolt Included | No |
| Mounting Bracket Included | Yes |
| Mounting Hole Diameter | 0.33 |
| Mounting Hole Quantity | 2 |
| Outside Diameter | 64.9 |
| Programming Required | No |
| Pulley 1 Flanged | No |
| Pulley Center Bore Diameter (in) | 0.669in |
| Pulley Center Bore Diameter (mm) | 17mm |
| Pulley Outside Diameter (in) | 2.559 |
| Pulley Quantity | 1 |
| Pulley Width (in) | 0.998in |
| Pulley Width (mm) | 25.36mm |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Worn or cracked tensioner pulleys |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Drive belt squeal |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Tensioner misalignment |
| Signs of Wear & Troubleshooting - Section 1 - Header | Signs of wear for drive belt tensioner assembly include but are not limited to: |
| Tensioner Type | Arm |
| UPC | 00808709374541 |
| Weight (lb) | 1.03 |
| Width | 1.12 |
Also Purchased
Also Purchased
Policies
Vehicle Fitment
Select Your Vehicle Select
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|