UPC / GTIN
707773852125 / 00707773852125
FAQ - Answer 1
No, but it is a good idea to inspect them for wear-out, cracking, leaking, etc.
FAQ - Answer 2
Yes, ACDelco also offers GM OE Brake Pads and Professional Brake Pads.
FAQ - Answer 3
No, but it is a good idea to inspect your brake pads at each tire rotation.
FAQ - Question 1
Do I have to replace all my brake parts when replacing my brake pads?
FAQ - Question 2
Does ACDelco offer other grades of brake pads?
FAQ - Question 3
Do I have to replace my brake pads after a certain amount of time?
Features & Benefits - Bullet 1
Ceramic, Semi-Metallic, and Organic formulas provide safety and reliability for a range of vehicle applications
Features & Benefits - Bullet 2
Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Features & Benefits - Bullet 3
No curing or machining required, ready to be installed right out of the box
Features & Benefits - Bullet 4
Some ACDelco Silver parts may have formerly appeared as ACDelco Advantage
Features & Benefits - Bullet 5
Economical value with dependable quality
Features & Benefits - Bullet 6
For General Motors vehicles as well as most makes and models
Friction Material Attachment
Bonded
Friction Material Composition
Metallic
Good Maintenance Practices - Section 1 - Bullet 1
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Header
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header
The following should be conducted by a qualified technician:
Inner Pad Friction Material Thickness
18.4
Inner Pad Friction Material Thickness (in)
0.72
Inner Pad Overall Thickness
0.709
Mounting Hardware Included
No
Outer Pad Friction Material Thickness
0.7<br />17.8
Outer Pad Overall Thickness
0.709
Pad Wear Sensor Included
No
Signs of Wear & Troubleshooting - Section 1 - Bullet 4
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 5
Vehicle pulls to the left or right when brakes are applied.